Click on an image to see the full-size picture.
Technical specifications:
Planing line specification with dimensions:
|
WACO 3000 TECHNICAL DATA: |
|
|
|
Max feed rate 160 m / min |
|
|
|
Electronic speed control 0-160 m / min |
|
Feed motor - 30kW |
|
Max Work Width Compactor Unit / ÖK2, PPK 300/250 mm |
|
Minimum working height 7 mm |
|
Max working height 110 mm |
|
|
|
Spindle speed 5000 rpm |
|
Spindle diameter 50 mm (not 45 mm !!!) |
|
|
|
Total machine length 4120/4520 mm |
|
Total machine width 1700 mm |
|
Total table height incl. machine shoes 975 mm |
|
|
|
Spindles configuration: |
|
Bottom - 24,5 kW |
|
Top - 15 kW |
|
Right - 22 kW |
|
Left - 24,5 kW |
|
Bottom - 15 kW |
|
Top - 15 kW |
Contact us for detailed price information!
____________________________________________________________________________________________________________________________________________________________________
WADKIN RK 24 THICKNESSER
Click on an image to see the full-size picture.
Specifications:
- 610 x 230 mm with sectional feed
- 6 feedspeeds through gearbox: 6 – 30,4 m/min
- 4-knife circular cutter block, one set of planing knives
- Motor 11,2 kW (3-phase)
Contact us for detailed price information!
____________________________________________________________________________________________________________________________________________________________________
WEINIG HYDROMAT 23 PLANING LINE
Click on an image to see the full-size picture.
|
Weinig Hydromat 23 planing line: |
|
|
|
(No.1) Tilt forks |
||
|
(No.2) Tilt |
||
|
(No.3) Buffer |
||
|
(No.4) Weinig Infeed table |
||
|
(No.5) Weinig Hydromat 23 moulder |
||
|
(No.6) Outfeed |
||
|
(No.7) Stacker |
||
|
(No.8) Stacker forks |
|
Weinig Hydromat 23 – technical specifications |
|
Working width: 20 - 260 mm |
|
Working height: 10 - 160 mm |
|
Feed speed hydraulically variable: 6 - 120 m/min |
|
Machine table hardened, fences chromed |
|
Waxilit pump to remove resin from machine |
|
Pressure rollers from above, pneumatic |
|
Liftable top pressure rollers in front of right tools allowing quick tool changes |
|
Electric height adjustment of top tool holders and feed |
|
Heavy cast machine base with optimized vibration behaviour |
|
Hydro outboard bearings on all horizontal spindles |
|
Safety and noise protection hoods |
|
Profile and straight jointers |
|
Weinig Hydromat 23 - spindles configuration |
|
|
First bottom |
11 kW - 50 mm spindle - 6000 rpm, outboard |
|
Fence side |
7,5 kW - 50 mm spindle - 6000 rpm |
|
Near side |
15 kW - 50 mm spindle - 6000 rpm |
|
Fence side |
11 kW - 50 mm spindle - 6000 rpm |
|
First top |
18,5 kW - 50 mm spindle - 6000 rpm, outboard |
|
Second bottom |
15 kW - 50 mm spindle - 6000 rpm, outboard |
|
Second top |
15 kW - 50 mm spindle - 6000 rpm, outboard |
|
Third bottom |
11 kW - 50 mm spindle - 6000 rpm, outboard |
Contact us for detailed price information!
____________________________________________________________________________________________________________________________________________________________________
WEINIG POWERMAT 2000 PLANING LINE
Click on an image to see the full-size picture.
|
Weinig Powermat 2000 planing line: |
|
|
|
(No.1) Tilt forks |
||
|
(No.2) Tilt |
||
|
(No.3) Buffer |
||
|
(No.4) Weinig
infeed table |
||
|
(No.5) Weinig
Powermat 2000 moulder |
||
|
(No.6)
Outfeed |
||
|
(No.7)
Stacker |
||
|
(No.8)
Stacker forks |
|
Weinig Powermat 2000 – technical specifications |
|
Working width (with tool working circle 93 - 120 mm): 20 - 230 mm |
|
Working height (with tool cutting circle 93 - 160 mm): 10 - 160 mm |
|
Feed speed electronically variable: 0 - 80 m/min |
|
Machine table hardened, fences chromed |
|
Manual Waxilit pump to remove resin from machine |
|
Pressure rollers from above, pneumatic |
|
Liftable top pressure rollers in front of right tools allowing quick tool changes |
|
Electric height adjustment of top tool holders and feed |
|
Automatic clamping of the tool holder axes (axial and radial), opens and closes when operated |
|
Weinig CAS-Logo Com-System |
|
Safety and noise protection hoods |
|
Weinig Powermat 2000 - spindles configuration |
|
|
First bottom |
11 kW - HSK toolholder - 12 000 rpm |
|
Fence side |
11 kW - HSK toolholder - 12 000 rpm |
|
Near side |
11 kW - HSK toolholder - 12 000 rpm |
|
First top |
15 kW - HSK toolholder - 12 000 rpm |
|
Second top |
15 kW - HSK toolholder - 12 000 rpm |
|
Second bottom |
15 kW - HSK toolholder - 12 000 rpm |
Contact us for detailed price information!